|
AVG Uticor's PMD 200 Slave Display was designed to give you more display continuity and flexibility than ever before. This extraordinary low-cost unit is an alphanumeric display that can be interfaced to all of AVG Uticor's PMD Master Message Displays, Message Controllers, Master Marquee Display, Touchscreen Programmable Graphical Interface, or any PC that has an RS-422A or RS-232C serial port.
Like its PMD 200 Series Master Display counterpart, the PMD 200 Slave is available with 2-line display with 20 vacuum fluorescent characters 0.433" (11.0 mm) high. Interfacing to this unit is not a problem either. The PMD 200 Slave Display supports both ASCII and AVG Uticor PMD protocols.
Each slave is given an individual address using switch one and two on the back of the panel . The units' addresses consist of a group number from 0 to 15 and a unit number from 0 to 4,095. Along with the individual addresses, you can also address all the displays in the same group or all the slave displays at once.
Connections to the PMD 200 Slave Display are made easily using the wire-clamp terminals provided on the back panel of the unit.
+ Features
+ Compatibility
+ Specifications
|
[ 
CATEGORY : PROGRAMMABLE MESSAGE DISPLAYS
