|
CARD LOCATION:
Uses one slot PLC rack
PLC COMMUNICATION:
Through input and output registers; allocate 12 Input and 12 Output registers for Modicon 984 Compact, 6 IN, 6 OUT for TSX Quantum
POWER REQUIREMENTS:
Customer (Power Input):
24 VDC ± 15% @ 100 mA
Position Transducer:
Resolver, Autotech Series RL100 or E7R
Motion Detector:
Programmable Low and High limits,
0-999 RPM
Brake Monitor:
Programmable Caution and Danger Limits zero to 9.99 sec. max.
Fault Output:
Normally energized. Deenergizes if broken resolver wire or internal fault is detected.
Motion Output:
Output energized whenever resolver RPM is between programmed limits.
|
RESOLVER INTERFACE:
Position transducer:
Resolver; Autotech Series RL100 or E7R.
Cable length between resolver and M8350:
2,500 ft (762 m) max, shielded
Resolver cable:
Overall foil shielded, twisted-pair, such as Autotech's cable (CBL-10T22-xxxx)
M7251PLS MODULE
PLS Outputs : . . . . . . . . . . . . 16
PLS setpoints :
112 per PLS setup (maximum of 56 per group of 8 outputs)
No. of Setups : . . . . . . . . . eight
Speed Compensation :
Each PLS output has it's own compensation. Leading-Edge and Trailing-Edge speed compensation available. |
